|
Title: Trigger wheel and other stuff Post by: USA131 on July 07, 2009, 02:37:23 AM Fumbling around on the web this afternoon and found this site in the US with several interesting items for sale.
http://www.millersmule.com/Fiat_Parts.html If anyone is interested I could freight forward. USA131 Title: Re: Trigger wheel and other stuff Post by: mirafioriman on July 07, 2009, 09:57:25 AM Interesting. If I could get a trigger wheel for the 130 3200 V6 engine it would allow me to fit a Ford distributorless ignition system and upgrade from the points. Any info on prices?
Title: Re: Trigger wheel and other stuff Post by: alan.acs on July 07, 2009, 01:14:20 PM If you go to trigger wheels .com they are in the UK and have
various sized trigger wheels. Title: Re: Trigger wheel and other stuff Post by: mirafioriman on July 07, 2009, 02:23:04 PM Thanks for the link. They do a good range of kits and parts at very reasonable prices. Further investigation must be made but I might be able to get a system up and running on the 130.
Title: Re: Trigger wheel and other stuff Post by: USA131 on July 07, 2009, 07:45:40 PM It say on the page that you need to contact him for pricing info.I was interested in the venier cam pulleys and the crank pulley with the trigger wheel buili as well as the distributor plug.
USA131 Title: Re: Trigger wheel and other stuff Post by: mirafioriman on July 07, 2009, 09:29:40 PM Just had a quote from an engineering firm to rebuild my distributor with electronic parts of between ?200 and ?350 (needs to see it to give an accurate price)
According to the website link the Megajolt ecu is around ?120 and an EDIS 6 kit around ?100. I would then need a trigger wheel etc so not much difference in price for a Megajolt set up. If I can find a six cylinder Ford in my local breakers to get the coil pack, sensor etc cheaper I could save a bit too. Something to ponder..... Title: Re: Trigger wheel and other stuff Post by: USA131 on July 08, 2009, 02:57:20 PM You can buy megajolt kits in the US for ~80 USD with TPS or MAP. I just put one together and it took me about 4 hours. Then there is the cost of the EDIS module, coil pack and plug wires.http://www.autosportlabs.net/Main_Page
Another alternative is the Ford ESC module ( similar to EDIS without external ECU, ignition only) like on the low end 1.1 Fiesta or MKIII escorts. Thats what I have know and I have no compliants I going to put the Megajolt on the Zetec in my MK1 Fiesta. My 131 will pobably get the same treatment if it works out okay. Hence the interest in the trigger wheels and distributor bung. :) Shipping for the US to the EU is cheap via USPS. USA131 Title: Re: Trigger wheel and other stuff Post by: Tas131 on July 09, 2009, 11:40:35 PM http://www.millersmule.com/Fiat_Parts.html Jason's quite a talented operator, last time I was in contact with him he was juggling work in the machine shop and school. A couple of blokes in OZ have got gear from him and are quite happy with his work. |