|
Title: Water outlet Post by: USA131 on October 18, 2010, 08:10:54 PM I am looking for a cylinder head water outlet that goes directly to a hose rather than a T- fitting. Is this a stock or speciality item.
USA131 Title: Re: Water outlet Post by: Thotos on October 19, 2010, 01:50:14 AM I don't think it's a stock item although some early twin cams might have had it that way. Some people simply block off one side of the 'T' when they fit a thermostat into the head. It's also possible to cut off the 'T' and connect a pipe straight onto the bit that's left (see photo of 125 engine below).
(http://i55.photobucket.com/albums/g134/mound/1256.jpg) Title: Re: Water outlet Post by: Sev131 on October 19, 2010, 11:26:50 AM Good man Theo- gave me an idea. ;)
Title: Re: Water outlet Post by: cos124 on October 19, 2010, 11:28:57 AM on ebay, but in USA
http://cgi.ebay.com/ebaymotors/Fiat-124-Thermostat-Aluminum-Housing-1968-74-79-80-_W0QQcmdZViewItemQQhashZitem3a5f9a7e80QQitemZ250712063616QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Title: Re: Water outlet Post by: USA131 on October 20, 2010, 05:11:41 AM Looks like a normal one that has been attacked with a grinder. :-\
USA131 Title: Re: Water outlet Post by: cos124 on October 20, 2010, 07:20:04 AM I HAVE ONE OF THESE ON MY TWINCAM, IT'S BEEN CAST LIKE THAT AND IT HAS THE THERMOSTAT INCLUDED
Title: Re: Water outlet Post by: USA131 on October 21, 2010, 04:34:26 AM So is it for sale?
Usa131 Title: Re: Water outlet Post by: cos124 on October 22, 2010, 08:17:36 AM Hi, the link i sent you was from someone that is selling one on ebay, like the one i have on my engine. I'm not selling mine!
|