|
Title: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 17, 2013, 10:04:16 AM Kent Cams FT10 Cams little use with box ?250 (?650 New) Proper pics of Cams Now in listing!!
Kent cams Adj pulleys with little wear on back of pulley were last owner didn't tighten bolt properly before starting, not seen once fitted Sold! Gasflowed on inlet only 62k130TC head with no cams ?SOLD I've just sold my 130tc and i have a lot of New Fiat & aftermarket parts if anyone one has one on here including Full set of Koni's,2 x strutbraces,2x Abarth manifolds, Rollcage, rare Fiat electric windows, New single head light grill, 2 New front calipers, New front & rear indicator lenses, arch kit, Powerflow stainless backbox made for 130tc,gearbox, New Inlet carb rubbers,Nwe in box K&N panel filter,New clutch cable....Loads more parts. Parts are in Romford,Essex. Pics here http://www.ebay.co.uk/itm/281045795426?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 17, 2013, 11:18:28 AM Also have for sale Very Rare Autobianchi A112 Abarth 2 spoke steering wheel with Abarth stamped on front & Abarth horn button c/w boss, 127 sport oil pressure/Clock instrument pod, Fiat 127 1300GT red front grill, 130 TC Aftermarket alloy oil cooler & hoses... will ad more parts when i go through them properly.
Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: daverwd on January 17, 2013, 06:50:00 PM PM sent
Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 21, 2013, 09:31:38 PM Twin 40 Weber's come with 2 K&N filters and linkage to run without 130TC Airbox all for ?200.
Ebay link with pics http://www.ebay.co.uk/itm/281045795426?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: jasonh131 on January 21, 2013, 10:52:18 PM Romford man ;)
Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tas131 on January 23, 2013, 11:53:45 AM Would you consider freighting the head to Tasmania? Don't need the cam boxes, so it would be a bit lighter.
Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 25, 2013, 08:57:11 AM Romford man ;) Originally from Ireland, but i've been living the Essex dream since 1988 ;D Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 25, 2013, 09:06:19 AM Would you consider freighting the head to Tasmania? Don't need the cam boxes, so it would be a bit lighter. Yes, but you know that postage will be very high. I've just sent a 2.4 kilo strut brace to New Zealand and it cost ?58 postage with Royal Mail. Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tas131 on January 25, 2013, 10:23:23 AM Yes, but you know that postage will be very high. I've just sent a 2.4 kilo strut brace to New Zealand and it cost ?58 postage with Royal Mail. I've got a bare head in a box in the shed, I just weighed it, a bit under 10Kgs, freight would be a bit rich I imagine. Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 25, 2013, 09:50:53 PM Yes, but you know that postage will be very high. I've just sent a 2.4 kilo strut brace to New Zealand and it cost ?58 postage with Royal Mail. I've got a bare head in a box in the shed, I just weighed it, a bit under 10Kgs, freight would be a bit rich I imagine. It might be worth trying DHL,Fed-ex,UPS on some economy service. Should be a fair bit cheaper than Royal Mail. I can pm you an address they can collect from so you can get a quote. Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tas131 on January 26, 2013, 09:58:32 AM I can pm you an address they can collect from so you can get a quote. No don't worry, it's more of a want than a need. It'd probably be just as cost effective to get some port work on the head I've got. Title: Re: Kent Cams FT10, Kent Cams Adj pulleys,130TC Gas flowed head Post by: Tayto.king on January 26, 2013, 03:38:48 PM No probs. Just sold the head today.
|