|
Title: track control arms joint Wanted Post by: 131 Lover on December 29, 2011, 03:42:51 PM Does anyone know where to buy these joints loose and not the complete control arm?
heres a link to a photo of the hole arm http://www.ebay.co.uk/itm/150653625207 A happy new fiat year to you al! Regards Alf Title: Re: track control arms joint Wanted Post by: mirafioriman on December 29, 2011, 04:56:51 PM I've seen them listed on ebay a few times. You could try Ebay in Italy.
Title: Re: track control arms joint Wanted Post by: Fiat 131 Abarth#2 on December 29, 2011, 04:59:09 PM Fiat 131 control arm are always complete control arm with joints?
there are not singly! like Fiat 124. singly joints, you need it for? ??? Enzo ;) Title: Re: track control arms joint Wanted Post by: 131 Lover on December 30, 2011, 07:38:52 AM its for a orginal Abarth with aluminium controlarms thats the reson.
Alf Title: Re: track control arms joint Wanted Post by: Thotos on December 30, 2011, 08:20:44 AM This might fit http://www.ebay.co.uk/itm/Fiat-Uno-1-0i-8v-45-FWD-Ball-Joint-Lower-LH-1992-1993-FBJ5077-/260908809545 (http://www.ebay.co.uk/itm/Fiat-Uno-1-0i-8v-45-FWD-Ball-Joint-Lower-LH-1992-1993-FBJ5077-/260908809545)
Or this http://www.ebay.co.uk/itm/Ball-Joint-Fiat-Ducato-/150676886280 (http://www.ebay.co.uk/itm/Ball-Joint-Fiat-Ducato-/150676886280) or this http://www.ebay.co.uk/itm/FIAT-PANDA-LANCIA-Y10-BOTTOM-BALL-JOINT-PAIR-QH-/120560296778 (http://www.ebay.co.uk/itm/FIAT-PANDA-LANCIA-Y10-BOTTOM-BALL-JOINT-PAIR-QH-/120560296778) Measure the originals and try to get some measurements of the other Fiat/Lancia single ball joints. I'm sure the 131 Abarth ones will be the same as something else in the Fiat/Lancia range. Title: Re: track control arms joint Wanted Post by: Fiat 131 Abarth#2 on December 30, 2011, 08:21:50 AM its for a orginal Abarth with aluminium controlarms thats the reson. Alf orginal Abarth! aluminium controlarms ??? Enzo ;D Title: Re: track control arms joint Wanted Post by: 131 Lover on December 30, 2011, 06:29:06 PM Thanks for the response!
Thotos: they look very much the same, i have to investigate, Thanks! Enzo: Yes its a Al italia safari model witch was used in the safari rallye in -79, with only 3 left in the world,The guy who owns it visited me yesterday and got some parts for his cars! Tried to help him with the control arm, i was surprised that it was aluminium,it was just like the one in cast iron, the car was used to early 80-ties! He is building 2 exakt replikas of this car.. I am going to visit him later this spring and take some photos of the car. Se his homepage:http://www.ntsmotorsport.se/fiat-131-abarth/ Click on the yellow parts for movies.. Regards Alf Title: Re: track control arms joint Wanted Post by: Fiat 131 Abarth#2 on December 30, 2011, 07:11:07 PM Hi Alf,
Ok then the for the next wanted search! you must write the correct text: ??? track control arms joint Wanted for "131 Abarth safari model". and not post "heres a link to a photo of the hole arm" http://www.ebay.co.uk/itm/150653625207 than i can give you this pic, and say that's very difficult to find one. there are build only 4 cars with this arms. :-[ Good luck Enzo ;) Title: Re: track control arms joint Wanted Post by: 131 Lover on December 30, 2011, 08:34:10 PM Hi!
The reason was because we think that the standard joint could fit,. Title: Re: track control arms joint Wanted Post by: sdebez on December 30, 2011, 10:41:18 PM if you find them please post here, i would like to make some alloy gr4 abarth jolly club volta original track control arms.
sach Title: Re: track control arms joint Wanted Post by: 131 Lover on January 02, 2012, 12:23:56 PM Enzo:you were right about the ad,iam sorry,i was in a bit of hurry, you know small children!
Title: Re: track control arms joint Wanted Post by: sdebez on January 02, 2012, 04:39:25 PM if you look on the completed listings for ebay, there is some unsold 131 ball joints.
sach Title: Re: track control arms joint Wanted Post by: 131 Lover on January 02, 2012, 07:42:06 PM Thanks Sach, i will have a look..
Cheers Alf Title: Re: track control arms joint Wanted Post by: sdebez on January 02, 2012, 10:42:18 PM if you have a look on the grp4 fabrication site they offer a real high quality alloy tca for the escort, might be good for some ideas.
sach |