To my 3MA friends

[simon131]

Guys,

I think that I have decided to come to Germany again in my Abarth, but as I have already posted, there is a nasty clutch bearing noise, which might last for ages but could prove catastrophic   I have sought several 'expert' opinions on the matter and most have said that even making the noises it does it doesn't mean it's likely to fail anytime soon, although it just might.

I intend to lay under my car tomorrow and see if there is anything obvious that I can lubricate or tighten - as there is the chance, albeit minimal, that it's something other than the bearing. Here's hoping.

I have a few options if the worst should happen whilst I'm away from home, but what I am asking is that you all bear with me if the worst should happen as I might need to be someone's co-pilot for a few days - please.

I might also be seeking a lift back to the UK, as I will probably leave the car in Germany for Enzo to sort out - if he is willing to take it on.

Thanks for your understanding guys.

Simon

[kev131]

Best of luck with the plan Simon.

Do you want me to bring a spare clutch or do you have one? 

Of course everyone will be understanding - Sure it could be any of us the day after.

[simon131]

Thanks Kev.

If you can get the clutch in it might be a good 'insurance policy'. Thanks.

See you on Monday - I'll be holding my breath for a week!

[Robert]

Simon, there are 2 places for emergency repair in and around Miesbach - one just down the road from the hotel (a professional garage run by a mate) and the private garage of a very good friend of mine, both fully equipped (actually, I spoke to Stefan, my friend, just this afternoon and he offered his help if needed in any case). So, if you (or Kevin) bring the proper clutch and/or bearing, installing it will be a matter of hours, not days 

[jasonh131]

That really good of you Robert . Lets hope any of us won't need the help .

[kev131]

Yes very reassuring - Clutch packed. 

[jasonh131]

clutch
http://131abarth.com/?page_id=5
  it says 230mm clutch , sport 215 mm ? super chargerd one was a 230mm ?

[jasonh131]

 2.0 one on ebay
http://www.ebay.co.uk/itm/TORQUE-FAST-ROAD-STAGE-2-CLUTCH-KIT-FIAT-STRADA-2-0-85-88-/400324811899?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d3537dc7b

Or does stilo 230mm 20 splines fit

http://www.ebay.co.uk/itm/Fiat-Stilo-230mm-Sachs-Clutch-Kit-Genuine-OE-Quality-Replacement-New-/370764538989?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AFiat&hash=item565349e46d

or in germany on the way dooes a kappa one fit

http://www.ebay.de/itm/original-SACHS-KUPPLUNG-SATZ-KUPPLUNGSSATZ-KOMPLETT-230mm-20-Zahne-/400422527070?pt=DE_Autoteile&fits=Make%3ALancia&hash=item5d3b0ae05e

[Sev131]

215 should still fit and get you out of trouble. I would check to see if the spring fitted to the release arm to gearbox casing is still located, will help ease the pressure off the bearing.

[Heini131]

I have a few options if the worst should happen whilst I'm away from home, but what I am asking is that you all bear with me if the worst should happen as I might need to be someone's co-pilot for a few days - please.

 No problem at all, you are welcome 
With a good co-pilot we could go for pole positon... 

[simon131]

Thank you all for your help and understanding guys.  I didn't want you all to think that I was simply recklessly undertaking the trip with a faulty car.

I hope that the same bearing fits every 131 TC clutch  and if a 131 Sport clutch will fit in the short term it could be a 'quick win' - but we'll see. The bearing is my main concern at this point however - and my fingers are crossed.

Thanks again.