|
Title: Brake caliper banjo bolts.......... Post by: donk r8 on November 11, 2013, 06:13:21 PM Hi Guys, got some reconditioned calipers for the 131 but they are a newer version and the banjo's need to be shorter, it has 84 stamped on the caliper so I assume Uno ones would be the right ones?? question is where to get them from, any ideas... ::) found some on fleabay but does anyone know the exact size......................thanks.......... :)
Title: Re: Brake caliper banjo bolts.......... Post by: jasonh131 on November 11, 2013, 07:05:50 PM mine dont have banjo's ;) or a youkali ;D
Title: Re: Brake caliper banjo bolts.......... Post by: donk r8 on November 11, 2013, 07:53:33 PM mine dont have banjo's ;) or a youkali ;D Thanks, really helpful.................. ;D ;D Title: Re: Brake caliper banjo bolts.......... Post by: donk r8 on November 12, 2013, 11:02:00 AM Found the right ones....................... 8) http://www.ebay.co.uk/itm/131002863690?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Title: Re: Brake caliper banjo bolts.......... Post by: strada on November 12, 2013, 07:46:11 PM the later calipers have the inlet at an angle rather than vertical, THEY DO NOT USE BANJO BOLTS & THE THREAD IS METRIC, to fit these you need later hoses which screw straight in, also fitted to strada mk2, you may have to change the ends of the metal pipes to metric too depending on what master cylinder is fitted which could be either on a mk2 131.
i also have some orf the other parts you have been looking for on a previos thread but they are from mk3, pm if any good to you, chris Title: Re: Brake caliper banjo bolts.......... Post by: donk r8 on November 13, 2013, 05:22:27 PM the later calipers have the inlet at an angle rather than vertical, THEY DO NOT USE BANJO BOLTS & THE THREAD IS METRIC, to fit these you need later hoses which screw straight in, also fitted to strada mk2, you may have to change the ends of the metal pipes to metric too depending on what master cylinder is fitted which could be either on a mk2 131. i also have some orf the other parts you have been looking for on a previos thread but they are from mk3, pm if any good to you, chris Hi Chris, thanks for that!! I found out last night while putting the brakes back together as I found a set of later brake lines in the workshop and trawling through the grey matter I remembered how they used to be!! I have sent you a pm regarding the other things........................thanks, Chris Title: Re: Brake caliper banjo bolts.......... Post by: Tas131 on November 15, 2013, 06:34:29 AM THE THREAD IS METRIC Both threads are metric, one is 1mm pitch, the other 1.25mm I believe. |