Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
May 17, 2024, 05:24:19 AM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  The Garage (Moderator: Admin)
| | |-+  Fiat 131 Centre bore.
« previous next »
Pages: [1] Go Down Print
Author Topic: Fiat 131 Centre bore.  (Read 4726 times)
parrish
Hero Member
****
Offline Offline

Posts: 831


« on: February 08, 2009, 02:33:31 PM »

Does anyone have the Centre bore dimensions for the axles of a 131?
ive been told its 58mm can someone check for me.
Steve.
« Last Edit: February 08, 2009, 02:35:21 PM by parrish » Logged

Steve Parrish owner of:  1977 131 4 door.
sid131
Hero Member
****
Offline Offline

Posts: 3,403



« Reply #1 on: February 08, 2009, 04:24:12 PM »

Hi Steve its 45mm
Logged
parrish
Hero Member
****
Offline Offline

Posts: 831


« Reply #2 on: February 08, 2009, 05:15:00 PM »

Seriously!
I thought it was 58mm!

Logged

Steve Parrish owner of:  1977 131 4 door.
sid131
Hero Member
****
Offline Offline

Posts: 3,403



« Reply #3 on: February 08, 2009, 06:30:30 PM »

Steve the pipe where the half shaft goes through is 45mm inside diameter, any other measurements you need i have cos i cut up rear axle this week, just ask.
Logged
parrish
Hero Member
****
Offline Offline

Posts: 831


« Reply #4 on: February 08, 2009, 09:14:33 PM »

Sorry Sid,
i was unclear in my first request.
Its the centre bore for the wheel im looking for.
The collar of the wheel sits around a protrusion from the axle, this locates and carries the weight of the wheel.
Regards
Steve
Logged

Steve Parrish owner of:  1977 131 4 door.
djape1977
Hero Member
****
Offline Offline

Posts: 1,835



« Reply #5 on: February 09, 2009, 12:15:42 AM »

center hole on the wheel should be 58.2mm
if bigger - get yourself some adaptors made, if smaller - get it machined to 58.2
Logged

get a bigger hammer!
Pages: [1] Go Up Print 
« previous next »
Jump to:  



Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.



Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com