Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
May 01, 2024, 11:50:47 PM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  The Garage (Moderator: Admin)
| | |-+  Rear upper control arms?		 « previous next »
Pages: [1] Go Down Print
Author Topic: Rear upper control arms?  (Read 5176 times)
Tas131
Hero Member
****
Offline Offline

Posts: 761
« on: March 10, 2008, 01:14:34 AM »
Does anyone know if the rear upper control arms can be replaced with 124 items? The bushes are flogged out on mine and good replacements are as rare as hens teeth. Or if anyone knows the mounting bolt centre to centre measurement it would be a good start.
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
Tas131
Hero Member
****
Offline Offline

Posts: 761
« Reply #1 on: March 11, 2008, 08:54:53 AM »
No go, 124 arms are 300mm and 131 are 320mm, I'll have to modify the ones I've got.
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
djape1977
Hero Member
****
Offline Offline

Posts: 1,835
« Reply #2 on: August 06, 2008, 10:08:48 PM »
what about f 132 control arms? or lada 2101/...07? bushes are the same. i just replaced the bushes on my 132 with ones from lada. under 1e/piece
Logged
get a bigger hammer!
Tas131
Hero Member
****
Offline Offline

Posts: 761
« Reply #3 on: August 07, 2008, 05:58:41 AM »
Quote from: djape1977 on August 06, 2008, 10:08:48 PM
i just replaced the bushes on my 132 with ones from lada.

Do you know the length of the arm, from bolt hole centre to centre?
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
djape1977
Hero Member
****
Offline Offline

Posts: 1,835
« Reply #4 on: August 07, 2008, 07:51:34 AM »
dunno, but will measure and post in next couple days
Logged
get a bigger hammer!
Yagmur
Hero Member
****
Offline Offline

Posts: 709
« Reply #5 on: August 14, 2008, 06:53:55 AM »
Hi Ta 131
Why you need them to replace with 124 ones.I have brand new ones.
If you want I can send.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.


Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com