131 twin cam timing marks.
mirafioriman:
Have scanned in this diagram to show the timing marks on a twin cam engine. Don't forget to line up the oil pump pulley wheel!
Thotos:
The crankshaft pulley needs to be removed to change the belt (although Jason claimed he could do it without removing the pulley :-\) There's a timing mark on the crankshaft cogged wheel that needs to be lined up with the mark on the crankcase. The marks can be seen in the photo below:
mirafioriman:
It is a bit of a squeeze but you do not need to remove the crank pulley. At least not on my engine ;D
Thanks for posting this up it is to help our Panorama owning member in the Ukraine.
mirafioriman:
Just checked my Haynes manual. Does not tell you to remove the crank pulley. ;)
simon131:
I've never had to remove the crank pulley either ;)
Navigation
[0] Message Index
[#] Next page