Im confused!
Just refitted front suspension, strut tops are alarming me.
I dont have the type as shown in the 'Haynes Manual'
From under the car I have a spring carrier (top) that slots into an inverted piece carrying a nylon bush, then from the top i have a rubber central bush that carries the central strut.
What is alarming me is that it appears the central rubber section carries the central strut and that their is far to much up and down movement to allow the strut to operate as a damper, and im worried that the first big bump and the strut rod will be pushed through the bonnet?
Re-assembly was the same as dismantling.
Any comments?
see attached photo of strut top.