Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
May 24, 2024, 03:57:48 PM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  For Sale and Wanted (Moderator: Admin)
| | |-+  Cambox wanted		 « previous next »
Pages: [1] Go Down Print
Author Topic: Cambox wanted  (Read 3790 times)
Fiat124ST
Jr. Member
*
Offline Offline

Posts: 16
« on: October 06, 2010, 04:45:01 PM »
Hi all.
Does any one have a cambox wich the distributor can run from the cam? I am putting a "BC" coupe head on my car and I need the cambox to finish the conversion.

* Photo0493.jpg (111.35 KB, 640x480 - viewed 410 times.)
Logged
Tas131
Hero Member
****
Offline Offline

Posts: 761
« Reply #1 on: October 06, 2010, 07:50:39 PM »
Do you just want the cambox or are you chasing everything for the conversion?
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
Fiat124ST
Jr. Member
*
Offline Offline

Posts: 16
« Reply #2 on: October 07, 2010, 05:50:59 AM »
Hi Tas, I just want the cambox.
Thanks
Neil
Logged
Tas131
Hero Member
****
Offline Offline

Posts: 761
« Reply #3 on: October 07, 2010, 07:52:50 PM »
I'll have a look in the shed, I should have one. Do you have a cam with the distributor drive gear?
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
Fiat124ST
Jr. Member
*
Offline Offline

Posts: 16
« Reply #4 on: October 09, 2010, 02:45:07 PM »
Yes,I do have the cam with the gear.
Logged
W.ARGENTA
Sr. Member
***
Offline Offline

Posts: 51
« Reply #5 on: October 09, 2010, 06:24:23 PM »
i have the cam  and the houseing (cam box) new
Logged
Fiat124ST
Jr. Member
*
Offline Offline

Posts: 16
« Reply #6 on: October 10, 2010, 04:52:08 PM »
Quote from: W.ARGENTA on October 09, 2010, 06:24:23 PM
i have the cam  and the houseing (cam box) new
Hi.
Thanks for responding, please send me a PM so that we can discuss it.
Thanks.
Logged
Fiat124ST
Jr. Member
*
Offline Offline

Posts: 16
« Reply #7 on: November 17, 2010, 10:54:47 AM »
Hi all.
I got hold of a cambox. Thanks all for helping and thank you Tas131 for the web link you sent me.

Will post some pictures when the head is done and on the car.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.


Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com