131mirafiori forum

Some Fiat parts - mainly engine parts - that have accumulated over the years, gathering dust, and it'll be good if can be of some use to someone doing engine work at the moment. Save you time in cleaning or re-plating as i've done that already.  Some parts very hard to come by, or impossible to find. Few are brand new. Any questions, get in touch.

Fiat 130 Abarth 2.0 ltr oil pump steel pulley, Used, but in as new condition ?8 + postage
SOLD

Fiat 130 Abarth belt tensioner spring assembly (washers etc). Used but cleaned and re-plated ?7 + postage.
If you want the back plate see bellow
http://img294.imageshack.us/img294/6091/dsc04032l.jpg

Fiat 130 Abarth belt tensioner back plate. Used but cleaned and re-plated ?6 + postage.
http://img651.imageshack.us/img651/2554/dsc04031v.jpg

Fiat 130 Abarth trigger sensor bracket. Used but cleaned and re-plated ?5 + postage. SOLD

Fiat twin cam 2.0 ltr crank pulley, brand new. ?9.50 + postage SOLD

Fiat 2.0 ltr twin cam plastic oil pump pulley. Used but good condition. ?5.50 + postage
http://img830.imageshack.us/img830/7186/dsc04028.jpg

Fiat 2.0 ltr twin cam, camshaft pulley set. Used but acid dipped and ready to be painted. These are the rarer ones with end flange fitted. ?12 for the set + postage
http://img35.imageshack.us/img35/3301/dsc04027pr.jpg SOLD

Fiat twin cam, cam-box covers. Acid dipped and shot blasted, used but as good as new ?10 + postage for the set - SOLD

Fiat twin cam, exhaust cam carrier. Used but cleaned and as good as new ?10 + postage. No dizi hole
http://img541.imageshack.us/img541/2645/dsc04025g.jpg

Fiat twin cam, another exhaust cam carrier. Used but cleaned and as good as new ?10 + postage. No dizi hole
http://img97.imageshack.us/img97/2706/dsc04024e.jpg

Fiat twin cam dipstick tube, Used but as good as new ?8 + postage
http://img830.imageshack.us/img830/4195/dsc04055.jpg SOLD

Fiat twin cam breather casting, Used, but cleaned and looking like new ?7 + postage
http://img35.imageshack.us/img35/6273/dsc04053qn.jpg SOLD

Fiat twin cam pointer? fits on the water outlet casting, Used but as new ?7 + postage
http://img835.imageshack.us/img835/9745/dsc04052.jpg

Fiat twin cam dizi clamp, Used but good ?5 + postage
http://img294.imageshack.us/img294/8536/dsc04051j.jpg

Fiat twin cam oil filler cap, Used ?4 + postage
http://img835.imageshack.us/img835/8168/dsc04050.jpg

Fiat twin cam 2.0 ltr single carb air filter clamping plate, Used ?5
http://img97.imageshack.us/img97/8225/dsc04049qc.jpg

Fiat Spider CS2 de-cat pipe. Fot those with US imports. It's the 3 bolt flange type. Used but excellent condition ?5 + postage
http://img97.imageshack.us/img97/2526/dsc04042v.jpg

Fiat 124 coupe rear exhaust section. I think it's the 1.8. Brand new still in package as it was posted to me ?8 + postage
SOLD

Fiat twin cam alternator tensioner bracket (top) exhaust side mounted, Used  ?5 + postage
http://img651.imageshack.us/img651/1567/dsc04048c.jpg


Beta Volumex cyl head side cast manifold. Used but cleaned and looking as new ?85 + postage
http://img835.imageshack.us/img835/6140/dsc04078.jpg

Beta Volumex carburator side cast manifold. Used but cleaned and looking as new ?70 + postage
http://img651.imageshack.us/img651/1751/dsc04079t.jpg

Carb for the volumex also available if interested. No supercharger though.

for the small parts, postage in UK would be around ?2 to ?2.50. Bigger heavier parts like manifolds or the calipers a bit more, but i'm keeping it reasonable.

those wouldn't happen to be like these? what's the manufacturer? is it a set of four cylinders?
http://ladaparts.ru/nova/2107/g200.jpg

hi, i don't think it is.
The best photo of the whole assembly is this:
http://img534.imageshack.us/img534/7670/caliper.jpg

the caliper has a single piston

hi will the calipers fit my 127 sport  it is 1980 , cheers Sean

hi, yes it will fit the sport up to 1982 models

calipers now sold

Fiat 124 coupe rear exhaust section. I think it's the 1.8. Brand new still in package as it was posted to me ?8 + postage
http://img638.imageshack.us/img638/8593/dsc04056f.jpg

still have this?

hi, yes i do. Where about are you based?

hi, just realised you are based in Serbia! Well unless there is a sortage of exhaust systems for the 124's i would guess that the postage would cost more than getting a new system near you. Up to you. Please  ;) don't make me go to the post office if just enquiring about postage costs. Only kidding!. I've done so many trips to my post office to get a quote and so many never even bothered to get back to me to say thanks but no thanks!

would be nice if you could at least unpack it and take a look who made it. i can get one for around 70e locally, made by IMSAAF. i suppose that postage should be in a region of 20-30 euro so if it's a quality item, it should be considerably cheaper...
so for now, no need to go to post office, just unwrap it if not too much trouble.
thanks in advance.

p.s.
since i bought 124bc recently, i thought it might be a good idea to start collecting the bits.

no problem, i'll have a look for you. It's at home so i'll reply tomorrow.

no rush

Hi there, had a look at the exhaust and can't see any make or manufacturer marking anywhere i'm afraid.

probably not worth the trouble i'm afraid. thanks anyway.

no probs.

Fiat 130 Abarth 2.0 ltr oil pump steel pulley, sold

Cam covers & dipstick tube now sold