Wheel Spacer Fiat 131 Abarth Replica

[rosi]

Hello all,

Question; I would like mounting a set of wheel spacers for my Fiat 131 Abarth Stradale replica.

My wheels have ET 15

-Do you have a recommendation of types of wheel spacers?
-Which broadness is ideal

Many thanks for pictures and links to buy the spacers.

Rosi

[Fiat 131 Abarth#2]

it's a question of wide 7, 8, or 9" inch   

[sdebez]

the thickest you can get, but so the tyres dont rub the body.

[mirafiori76]

It's one of those things you have to figure out by yourself. Just take some measures. It all depends on the rear axle and your rims.

[adcostas]

Hi on my replica for the rear  i could not find anything off the shelf so i had them done 10 cm for the front i got them from ebay also i got wheels with a bit of offset
cheers

[rosi]

My 131 Replica has Gotti wheels 8x15 / ET 15 / 205/50 15 rear and 6x15 / ET 15 / 195/50 15 front.

What do you mean 20mm spacers front and rear (Axle 40mm)

[rosi]

here is a picture

[miro-1980]

If i  remember correctly mine are 45 mm ...

[Fiat 131 Abarth#2]

normally Fiat 131 Abarth stradale have 7x15 ET 0
you use 8x15 / ET 15 rear and 6x15 / ET 15 front
it's possible 20 mm in front are to less and 20 mm rear to much!
i think it's better to take self the measurement and than decide
which spacer!

BTW: Miro nice brakes 

[rosi]

Many thanks for your answers.

what do you mean of this spacers:
http://www.ebay.de/itm/SPURVERBREITERUNG-40-mm-FIAT-Stilo-4x98-NEU-/270505028673?pt=DE_Autoteile&clk_rvr_id=412809967790

How much are the diameter of the central hub? 58.1mm?

regards from switzerland

rosi

[Fiat 131 Abarth#2]

yes it's 58.1mm!