Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
May 14, 2024, 10:16:21 AM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  For Sale and Wanted (Moderator: Admin)
| | |-+  wanted clutch kit		 « previous next »
Pages: [1] Go Down Print
Author Topic: wanted clutch kit  (Read 4116 times)
tonystar801
Sr. Member
***
Offline Offline

Posts: 87
« on: June 01, 2010, 10:28:37 AM »
hi all!!
Anybody have a clutch kit for 2000 TC?
Thanks you

I'm in France, Lyon.
Logged
hammerbeirne
Hero Member
****
Offline Offline

Posts: 640
« Reply #1 on: June 01, 2010, 10:33:13 AM »
Any good motor factors should be able to source one Tony i live in Ireland and ordered a full kit new It took a few weeks to arrive Price was 230 euros the clutch for a 2000cc is 215mm and is larger than a 16 or an1800 tc
« Last Edit: June 01, 2010, 10:44:56 AM by hammerbeirne » Logged
david
Hero Member
****
Offline Offline

Posts: 708
« Reply #2 on: June 01, 2010, 10:36:04 AM »
I always use Lancia beta 2000 plate (215mm plate) and cover and just get a 131 bearing as the clutch linings are usually better for the Lancia spec
Logged
tonystar801
Sr. Member
***
Offline Offline

Posts: 87
« Reply #3 on: June 01, 2010, 11:27:18 AM »
yes ok thank you, the best price in lyon is 250  euros for this.... :-S
Logged
kev131
Founding Member
Hero Member
****
Offline Offline

Posts: 3,923
« Reply #4 on: June 01, 2010, 12:55:28 PM »
Quote from: tonystar801 on June 01, 2010, 11:27:18 AM
yes ok thank you, the best price in lyon is 250  euros for this.... :-S

I got one from Ricambio a few years ago for c ?80.00 plus postage. Ebay seems to have lots of 131/132 clutches so an eagle eye there might be a good idea too.
Logged
Kevin Doyle
Fiat 131 Mirafiori Sport 2000TC
Fiat 131 Supermirafiori S3 2000TC
Limerick, Ireland
106usj
Hero Member
****
Offline Offline

Posts: 955
« Reply #5 on: June 01, 2010, 07:03:44 PM »
I got a complete 131 2.0 tc clutch kit of ebay end of last year with clutch release bearing for ?45 deliverd.
but the 2.0 tc one is not often for sale on ebay.
Logged
Tas131
Hero Member
****
Offline Offline

Posts: 761
« Reply #6 on: June 04, 2010, 08:10:16 AM »
Quote from: david on June 01, 2010, 10:36:04 AM
I always use Lancia beta 2000 plate (215mm plate) and cover and just get a 131 bearing as the clutch linings are usually better for the Lancia spec
Quote from: TOAD on June 03, 2010, 07:06:09 PM

and the Integrale 230mm 8v clutch will, after a re-drill, fit the 131 flywheel.

I may be in the market for a new clutch soon as well. Does anyone have any more information of which bits can be mixed and matched to get a better/stronger clutch in a 131?
Logged
Mick.
Tasmania. Australia.
Red/grey series 2 (Daily driver)
Dark blue series 1 (Dismantled)
Light blue series 2 (Crashed then dismantled)
Metallic blue series 2 (Dismantled)
Pages: [1] Go Up Print 
« previous next »
Jump to:  


Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.


Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com