|
Title: wanted series 1 rear lights and rear panel Post by: maxi.man on May 09, 2009, 08:45:14 AM has anyone got any can trade parts from a 131 racing or cash ?? also wanted new front panel
Title: Re: wanted series 1 rear lights and rear panel Post by: kev131 on May 09, 2009, 09:06:26 AM Hi maximan - The S1 lights are all over Ebay, UK, France, Italy, Germany - Should be easy enough to find & buy.
Also here is a front panel...Not sure how you go about buying this though...? http://www.subito.it/rivestimento-anteriore-fiat-131-trapani-5657795.htm Lights from the same website but same comments apply... http://www.subito.it/fanali-post-fiat-131-mirafiori-trapani-4959989.htm Title: Re: wanted series 1 rear lights and rear panel Post by: maxi.man on May 09, 2009, 09:07:57 AM thanks ;)
Title: Re: wanted series 1 rear lights and rear panel Post by: chris131 on May 09, 2009, 10:08:05 AM pm sent
Title: Re: wanted series 1 rear lights and rear panel Post by: Yagmur on May 09, 2009, 06:52:09 PM I have some rear panels and rear lenses.
Title: Re: wanted series 1 rear lights and rear panel Post by: mirafioriman on May 09, 2009, 09:06:49 PM Here you go, on Ebay in Italy. Reasonable postage to the UK too, although the picture is not too good.....
http://cgi.ebay.co.uk/FIAT-131-ABARTH-traversa-posteriore-nuova-originale_W0QQitemZ280343755414QQcmdZViewItemQQptZRicambi_automobili?hash=item280343755414&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50 Title: Re: wanted series 1 rear lights and rear panel Post by: kkkango on May 11, 2009, 03:09:05 PM Hi, I brought a pair of E bay rear lights as I have original 131 lights on my kit car although they are basically the same the printed circuit board connector is a lot longer than the original 131 lights I had.
to overcome this I had to drill out the rivets and remove the circuit board so I could solder wires on then put screws in to remount the boards, cut my loom ends plugs off and fit joining terminals. I suppose you could always swap the circuit boards from your old lights if the connectors are different and your boards are good. |