131mirafiori forum

Take a look here:
http://www.subito.it/accessori-auto/corpo-farfallato-ghigliottine-iniezione-padova-22043913.htm

Well, i haven't seen something like these. But i have something similar in stock (for sale). Two air intakes for Kugelfischer. Size like carburators and they fit on Ritmo 130 TC intake manifold.

Throttle bodies so you can convert to fuel injection. I think Parrish's 131 runs these.

I'd like to have those trumpets. Don't care about the rest for it doesn't fit the 16V head.

(http://img198.imageshack.us/img198/5020/1gbbfs741bde0a851f2f88a.th.jpg) (http://img198.imageshack.us/i/1gbbfs741bde0a851f2f88a.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

nice trumpets. i wouldn't mind having them on my "gilotine" setup

Pedja,

Do you mean you have this setup? Where did you get the gilotine slide manifold?

made locally by a guy who prepares race engines for last 25 years or so. it was on a 1,6 liter twincam Yugo driven in local championship, "hobby class". car was tested and engine power was measured on a rolling road dyno for homologation purposes, it had 167hp. unfortunately, car was crashed on it's second race so i bought the head with intake manifold and injectors. head had some serious work done to it too.
gilotine slide is working fine although it all looks a bit rough around the edges. it was made to work, not to look like a showpiece.
we were talking about some fabrication and i wasn't kidding. pretty much anything you can think of can be made with a grinder, lathe and a TiG welder. never underestimate ingenuity of people with serious lack of funds.

Are you using it now?

nope.
i bought it with an idea that i might use it one day. as you probably know, it's pretty much unusable for a road going car.
why, do you have some real use for it?

Well, i'm still looking for the proper system to fit my 16V engine. I still need the inlet manifold, the slide trottles and the trumpets. Pretty much everything from the inlet side. If it would fit the 16V inlet then i would certainly be interested. I could modifie the slide trottles.

then i guess you would be up for something like this
(http://img511.imageshack.us/img511/6318/dsc00566z.jpg) (http://img511.imageshack.us/i/dsc00566z.jpg/)

these are for fiat SOHC but we can make one off for 16v 131. pretty much all we need is a intake manifold gasket so we can copy stud and intake channels layout
(http://img253.imageshack.us/img253/3844/dsc01476kd.jpg) (http://img253.imageshack.us/i/dsc01476kd.jpg/)

That looks nice. I would have to take measurements of an inletmanifold. I do have the gasket and can make a copy of that. Then the slide trottle and then some long trumpets with fittings for injectors.
Any idea of costs, Pedja?

not really. i'll get back to you on that one.
you need to tell me what injectors do you want to use, what size inlet ports

I would have to get back on that one myself. A the moment i don't know any measurement whatsoever. I would have to inform with my parts supplier. See if he has original parts i can ake measurements from. We'll talk later. Would be very interesting  :) ;)

Does somebody have a source for factory style guillotine manifold for 8valve TC? I have a source for g.4 pump, injectors and fuel lines, so all I need is throttle bodies. Mirafiori76, did you have a first version DCOE throttlebodies for kugelfischer? I might be interested.

Marko

Yes, i still have the throttle bodies for sale. However, these are not slide throttle but butterfly type. Once used on Ritmo/strada 130 TC engine.

I sent you an e-mail. Did you get it?

I'm affraid, i haven't. What would you like to know? :)

Your profile show this address     mirafiori76 (ATAT) ziggo.nl
Is it incorrect? Please send me e-mail to my address marko1vaisanen (ATAT) gmail.com so I can answer back.

Marko

This adress isn't right. Can't change it. :-[
Pm send.

Changed the email adress for the right one. :)