|
Title: strada 130 engine Post by: gerafiori on October 04, 2007, 08:14:22 PM has anyone ever put a 130 abarth engine from a strada into a 131 sport,
i have sourced an engine as above with 175 brake {high comp pistons + highlift cams} should make my 131 move a bit quicker. gerry............... Title: Re: strada 130 engine Post by: barry on October 05, 2007, 01:31:11 PM Hi Gerry there is a very good thread on Guy Crofts forum also i think Steve who lives in spain has done the exact thing, there seems to be a slight modification of the gearbox shaft ie grind a few mill and round off the end plus a bearing is needed to support the shaft, i am in the process of putting a 8v integrale engine in and its the same for that. regards barry
Title: Re: strada 130 engine Post by: parrish on October 12, 2007, 04:37:48 PM You can leave the sump on as well as the oil filter housing.
http://www.guy-croft.com/viewtopic.php?t=720 I also have a spare bearing as i ordered two just incase. Steve Title: Re: strada 130 engine Post by: gerafiori on October 14, 2007, 08:21:12 PM thanks guys,
guy croft site has a wealth of info, regds gerry..... Title: Re: strada 130 engine Post by: martyk on October 26, 2007, 11:42:14 PM hi ger why not put your porshe engine into it i knew your were going to put something with a bit of va va voooooooooom ;D
Title: Re: strada 130 engine Post by: Tristan on October 27, 2007, 09:56:32 PM You can call out to ours if ya like Gerry , We've a gearbox out on the ground , and an 8v 2.0 if you want to see any of the measurements.
Title: Re: strada 130 engine Post by: gerafiori on October 28, 2007, 12:48:06 PM hi ger why not put your porshe engine into it? i knew your were going to put something with a bit of va va voooooooooom ;D i dont think 911 would pull great with 2ltr twin in the back Title: Re: strada 130 engine Post by: gerafiori on October 28, 2007, 12:51:27 PM You can call out to ours if ya like Gerry , We've a gearbox out on the ground , and an 8v 2.0 if you want to see any of the measurements. what hsepower in that engine that you have? Title: Re: strada 130 engine Post by: Tristan on October 28, 2007, 01:47:40 PM fast road cams , twin dellortos , ported and polished without biggish valves , I'd say about 135-140 bhp.
Title: Re: strada 130 engine Post by: theredx19 on October 29, 2007, 01:25:36 PM are they horizontal or vertical carbs on that engine :)
Title: Re: strada 130 engine Post by: Tristan on October 29, 2007, 07:39:32 PM Sidedraught , not like the Abarth .
Title: Re: strada 130 engine Post by: martyk on October 29, 2007, 10:29:40 PM tristan i would say that gerry would be looking for something with about 300 horses galloping underneath it ;D ;D why not put the 130 engine into the x19 put a bit of weight in the front and stiffen up the suspension ??? ???
|