|
Title: Wheel Spacer Fiat 131 Abarth Replica Post by: rosi on November 16, 2012, 01:09:11 PM Hello all,
Question; I would like mounting a set of wheel spacers for my Fiat 131 Abarth Stradale replica. My wheels have ET 15 -Do you have a recommendation of types of wheel spacers? -Which broadness is ideal Many thanks for pictures and links to buy the spacers. Rosi Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: Fiat 131 Abarth#2 on November 16, 2012, 02:59:31 PM it's a question of wide 7, 8, or 9" inch ??? Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: sdebez on November 16, 2012, 10:43:42 PM the thickest you can get, but so the tyres dont rub the body.
Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: mirafiori76 on November 16, 2012, 10:56:49 PM It's one of those things you have to figure out by yourself. Just take some measures. It all depends on the rear axle and your rims.
Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: adcostas on November 17, 2012, 03:18:30 AM Hi on my replica for the rear i could not find anything off the shelf so i had them done 10 cm for the front i got them from ebay also i got wheels with a bit of offset
cheers Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: rosi on November 17, 2012, 01:25:52 PM My 131 Replica has Gotti wheels 8x15 / ET 15 / 205/50 15 rear and 6x15 / ET 15 / 195/50 15 front.
What do you mean 20mm spacers front and rear (Axle 40mm) Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: rosi on November 17, 2012, 01:36:09 PM here is a picture
Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: miro-1980 on November 19, 2012, 02:09:05 AM If i remember correctly mine are 45 mm ...
Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: Fiat 131 Abarth#2 on November 19, 2012, 09:30:37 AM normally Fiat 131 Abarth stradale have 7x15 ET 0
you use 8x15 / ET 15 rear and 6x15 / ET 15 front it's possible 20 mm in front are to less and 20 mm rear to much! i think it's better to take self the measurement and than decide which spacer! BTW: Miro nice brakes :o Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: rosi on November 19, 2012, 06:13:57 PM Many thanks for your answers.
what do you mean of this spacers: http://www.ebay.de/itm/SPURVERBREITERUNG-40-mm-FIAT-Stilo-4x98-NEU-/270505028673?pt=DE_Autoteile&clk_rvr_id=412809967790 How much are the diameter of the central hub? 58.1mm? regards from switzerland rosi Title: Re: Wheel Spacer Fiat 131 Abarth Replica Post by: Fiat 131 Abarth#2 on November 19, 2012, 07:19:48 PM yes it's 58.1mm!
|