|
Title: interesting engine Post by: sdebez on June 14, 2013, 10:38:03 PM http://www.ebay.co.uk/itm/Fiat-Abarth-2-0-litre-twincam-engine-Ex-DTM-race-engine-190-BHP-/251284937144?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a81bfd9b8
Title: Re: interesting engine Post by: mirafiori76 on June 15, 2013, 10:06:36 AM If i would get that much of money for the engine i have standing then all my financial problems would be over ;D
Title: Re: interesting engine Post by: jasonh131 on June 15, 2013, 03:56:14 PM Strada 130tc in other words , but they had bigger valve's than that as standard ? 43mm and 131
41-1/2 mm Title: Re: interesting engine Post by: Tas131 on June 16, 2013, 02:27:42 AM All OZ 2 litre 131s had 43/36mm valves. It's not a 2 litre if it's only 81mm bore, unless they used a stroker crank.
Title: Re: interesting engine Post by: mirafiori76 on June 16, 2013, 06:44:31 AM Personally i don't even think this very engine is a 2 litre. I think it's a 105 TC which is a 1600.
It could deliver 190 Bhp if fitted with special cams and big carburators. Looking at all those holes in the flywheel (which i think is an unproffessional and ugly way to take off weight) i guess it will climb fast in revs. But again, the price for this single engine is way too high. Title: Re: interesting engine Post by: Tas131 on June 16, 2013, 12:06:53 PM It's a Lancia block.
Title: Re: interesting engine Post by: vode131 on June 16, 2013, 07:11:25 PM I think it is 2 litre block based on its height. Number on the block is also same as 130tc abarth. I did not find any comment about bore size but it seems to be 84mm (picture from the head shows the carbon deposits in combustion chamber). Pistons look standard 130tc and with them CR can not be much more than 9,5. Valve sizes cant be right in the advert, definitely too small. Head can be swappep from another model even if the camboxes are still from 130tc.
Ports looks big but with advertised valvesizes and low compression I dont think that 190 hp from that engine (if all pictures are from the same engine) is possible ;) Title: Re: interesting engine Post by: sdebez on June 16, 2013, 09:16:56 PM just looked at the guys other parts, he has a ferrari dino engine for nearly 10 Grand, that would be nice in a 131.
Title: Re: interesting engine Post by: Tas131 on June 16, 2013, 10:58:40 PM I think it is 2 litre block based on its height. Number on the block is also same as 130tc abarth. I did not find any comment about bore size but it seems to be 84mm (picture from the head shows the carbon deposits in combustion chamber). Pistons look standard 130tc and with them CR can not be much more than 9,5. Valve sizes cant be right in the advert, definitely too small. Head can be swappep from another model even if the camboxes are still from 130tc. Ports looks big but with advertised valvesizes and low compression I dont think that 190 hp from that engine (if all pictures are from the same engine) is possible ;) They've edited the text, added details about the cars and deleted the bit that said the pistons were 81mm. Everything looks wrong about it, and to get 190bhp out of that motor as it is is dreaming. |