|
Title: Abarth spare parts prices! Post by: Fiat 131 Abarth#2 on June 27, 2013, 07:29:46 AM always mad prices! is it gold or simply alloy?
http://www.subito.it/accessori-auto/testata-fiat-131-abarth-caltanissetta-68213329.htm will it be more expensive in the next years or it's the highest price ??? i need a lottery win to finished my project 037. :'( Title: Re: Abarth spare parts prices! Post by: simon131 on June 27, 2013, 08:41:07 AM Totally crazy! ::)
Enzo, do you know anyone who can supply me with a clutch for my Stradale? I'm in quite urgent need of one now :-\ Ideally someone who is trustworthy and who won't charge me 10,000 Euros! ;D Title: Re: Abarth spare parts prices! Post by: daverwd on June 27, 2013, 11:18:37 AM Dont know how many spines on a stradle gearbox but if they are the same as a 2litre sport/racing box.( am sure you would know the answer better than i. . ) . I have used a clutch plate from a 3litre alfa 164 & a pressure plate from a 131sport.
The inside of the pressure plate has to be spun on a lather to remove a few mil as the center of the 164 clutch plate is slightly bigger & stronger than the standard 131plate. . I see no reason as to why this would not work on a 131 abarth. Road car. . Other than the the spline count. i have ran this set up years ago on a replica with 9" rubber on the rear & 2litre engine with twin 40s. . A mate of mine runs this set up at the moment with 160bhp in his sport for the last 6 years and no issues. . As you are lucky enough to own an Abarth road car This could be worth looking into as seems any parts with the word Abarth on it at the moment is crazy money. . Title: Re: Abarth spare parts prices! Post by: Fiat 131 Abarth#2 on June 27, 2013, 11:36:43 AM Hi Simon,
you need to know wich diameter you have if it's ? 215mm you can use the 2,0 Racing but if you have ? 228mm it will be a little difficult to found one but not impossible so you found it by Helix Motorsport http://www.helix-autosport.com/home/ btw: Miro use it look here! http://131abarth.pl/?page_id=879 Enzo ::) Title: Re: Abarth spare parts prices! Post by: simon131 on June 27, 2013, 02:15:10 PM Thankyou Dave and Enzo for your replies. 8)
I was rather hoping to be able to determine the diameter of the clutch without having to strip the gearbox from the engine. ??? At the moment the general opinion is that my clutch noise is from the springs in the friction plate and the car is useable - albeit with an element of care on my part as I don't want to get stranded if it should suddenly 'explode'. If I strip the gearbox/engine and it all falls apart in my hand I won't be able to use the car again until I find the right clutch assembly. Title: Re: Abarth spare parts prices! Post by: parrish on June 27, 2013, 03:48:11 PM Simon,
Locate both clutch diameters explain to both parties that you will need one or the other. Remove gearbox measure and contact the appropriate seller. Don't leave it too long clutches are not very forgiving they either work or they don't. Box out is an hours job in the right hands, even less if you've done it enough! ;D Steve Title: Re: Abarth spare parts prices! Post by: jasonh131 on June 27, 2013, 06:30:28 PM You never know till u take it out , what was in the parts bin at the time or what someone previous had chuck in ??? ??? ???
you still got a few more 131 s to use in the mean time ;) ;) Title: Re: Abarth spare parts prices! Post by: Fiat 131 Abarth#2 on June 28, 2013, 10:24:09 AM the next horrible price!
http://www.subito.it/accessori-auto/compressore-volumetrico-abarth-napoli-63024495.htm as i say i need a lottery win to finished my project 037 :'( |