131mirafiori forum

131mirafiori home => General discussion => Topic started by: cypriot on January 28, 2014, 02:34:39 PM



Title: Fiberglass front center part ( Valance ? )
Post by: cypriot on January 28, 2014, 02:34:39 PM
Hello,

I noticed that the kit which I bought from walezy in 2007 has different front center fiberglass part than any other kit.

- is this one completely wrong one ?

- is it older model ?

- is it for cold climate because it has two small air intake at center (by the way it has not cut in the picture)

please comment on this issue.

cheers

Ali


Title: Re: Fiberglass front center part ( Valance ? )
Post by: mirafiori76 on January 28, 2014, 02:44:14 PM
It's not Stradale/group 4. I've never seen anything like it ever. Different though  :o


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Fiat 131 Abarth#2 on January 28, 2014, 06:00:59 PM
i am agree with Mike,
that parts was the first Abarth parts made by Walezy (Tomasz)
on the pic you can see the first and the second modified part!

the first have nothing to do with an Gr.4 or Stradale!
but the second comes near the Gr.4 and Stradale.



Title: Re: Fiberglass front center part ( Valance ? )
Post by: daverwd on January 28, 2014, 06:34:27 PM
Would have to agree with the above lads..
that front panel isn't something I have ever seen on a gp4 car ..
it's a matter of taste if you like it 'great' but if it's annoying you, now's the time to replace as it's to late when all sprayed up & bolted on.. cause I guarantee if you get a second panel after everything is sprayed the replacement panel wont line up with the wings .. it's fibreglass afterall & unlikely that 2 panels will come out exactly the same especially if your fussy about lines and gaps..
by the way great to see another one getting flared out.. :D


Title: Re: Fiberglass front center part ( Valance ? )
Post by: cypriot on January 29, 2014, 06:29:57 AM
Here is the Walezy 's reply;


"Re: Front Valance
? Sent to: cypriot on: Yesterday at 08:37:30 PM ?
Reply with quote  Reply  Remove this message 
Hello,
That front bumper was taken from car that was sold to Bulgaria as a part of some bigger government deal made in communist times. That bumper was used only in 1 or 2 cars and it was in real works group 4 car. The car was bought by my German friend that later gave me original panels to restore them and to make moulds of it.
Regards
Tomasz Cecot"


Quote from: cypriot on Yesterday at 01:57:31 PM
Hello Walezy,

http://www.131mirafiori.com/smf/index.php?topic=6900.0

I bought complete kit from you in 2007 ( I might be a wrong)

and noticed that this kit has different fiberglass front center  Shocked

I never seen same as this one where did you find this one ?

is for cold climate model rally cars ?

can you please comment

cheers

Ali


Title: Re: Fiberglass front center part ( Valance ? )
Post by: daverwd on January 29, 2014, 10:06:24 AM
There you go ,proves we all learn something new everyday..  :)


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Fiat 131 Abarth#2 on January 29, 2014, 10:47:29 AM

if you say it's built only 1 or 2 times but there are no past pictures from them!   :D

it's difficult to say it is Original,  without a proof of authenticity,   ::)

i love this story's about Original and not Original.  ;D
 
Enzo  ;)


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Walezy on January 29, 2014, 04:19:02 PM
I cannot say that everything is 100% original in that car that i got the parts from but it was definitely complete group 4 car, it had kugelfisher injection, dogbox, wide wheel arches , 16v engine, rollcage worth nothing(good just to dry clothes on it) etc. It has been barn find and now is completely restored to new condition.


Title: Re: Fiberglass front center part ( Valance ? )
Post by: mirafiori76 on January 29, 2014, 04:26:31 PM
Tomasz? Do you have pictures of that car? I think a lot of us are very interested in this front part.  :)


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Walezy on January 29, 2014, 04:56:39 PM
Only this one.


Title: Re: Fiberglass front center part ( Valance ? )
Post by: cypriot on January 29, 2014, 06:52:32 PM
Hello

It seems that even I like looking of the other model front valance I will have unique gr. 4 replica.  8)

Hey Thomasz, I think I was the one of your first customers for these fiber parts.

As I remeber at that time you only offer stradale or tarmac version (wide fender) fiber parts and there was no two different front valance.



Title: Re: Fiberglass front center part ( Valance ? )
Post by: mirafiori76 on January 29, 2014, 07:09:28 PM
Only this one.
:o I know this one. Some time ago i asked if anyone knew about specs and it's whereabouts.
Seems i have some problems with uploading pictures. Perhaps later...


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Sev131 on January 29, 2014, 07:50:23 PM
Only this one.

Wow, that is some barn find. Must be the best find ever ;)


Title: Re: Fiberglass front center part ( Valance ? )
Post by: 131rally on January 29, 2014, 08:28:15 PM
It seems to be a bit like the front pieces some Seat 131 Abarths had. Isnt it?

BTW, I just bought a very early mold kit. Its been made from ex-works car in Finland at 1980. In fact, it might be THE mold kit the Finnish dealer team had for making the parts for the works cars.

(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn1/t1/551104_471029216353132_1570322176_n.jpg)


Title: Re: Fiberglass front center part ( Valance ? )
Post by: mirafiori76 on January 30, 2014, 07:41:26 AM
Here is a picture of that car, as mentioned before.


Title: Re: Fiberglass front center part ( Valance ? )
Post by: mirafiori76 on January 30, 2014, 07:43:52 AM
And another one.


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Fiat 131 Abarth#2 on January 30, 2014, 09:24:26 AM
this Abarth was used in the Eastern countries for a couple of years.
From there , Helger Groppel and Uwe Groppel imported it and rebuild it over five years.
now it looks like the Hunsr?ck Rallye 1979 car from Walter R?hrl!
here the actually picture!


Title: Re: Fiberglass front center part ( Valance ? )
Post by: Walezy on January 30, 2014, 08:20:43 PM
Exactly, that is the car. It was a lot of work involved to make the car look like this but it was worth it.