|
Title: Ball bearing for prop shaft mount. 131 Post by: 106usj on November 07, 2009, 08:56:52 PM Hello.
Ive searched ebay for this part and cant find. Ive listened to all the comments recived from all about my drive shaft first gear problem after reading the Haynes manual ive decided to first try the ball bearing that is in the centre prop shaft mount. One problem where the hel do i fing it. Also can any one answer my clutch cable. question in Garage section. Thanks very much all... MacL. Title: Re: Ball bearing for prop shaft mount. 131 Post by: Thotos on November 07, 2009, 09:08:51 PM Contact Yagmur for the propshaft centre mount. He has brand new complete mounts. And while you are changing that it's worth changing the gearbox rubber mount at the rear as they get soft and allow the gearbox to move too much. As for the clutch cable, I thought all RHD 131s use the same clutch cable.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: Walezy on November 07, 2009, 09:52:15 PM Available in Poland also, if you need it just let me know and i will check the prices in local store.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: djape1977 on November 07, 2009, 10:08:22 PM centre prop shaft mount is the same as for any Lada. might be easyer to find and a lot cheaper. it's usualy supplied all in one - bearing and a rubber. also any fiat will do, 124, 125, 132, argenta
Title: Re: Ball bearing for prop shaft mount. 131 Post by: 106usj on November 07, 2009, 11:05:23 PM I bought the prop shaft mount on ebay but need the ball bearing to fit in it.
I can contact Yagmur to source it or. Walezy can you get me a price and order details please also a price for the flexible rubber coupling or as some call it the doughnut. Sory about the clutch cable question but im still learning in the parts dept. Also i hope to have the new k&n filter and base plate kit mid week so if it is not raining as usual in Scotland i will let you all know when i take the K&N on its maiden voyage. MacL....... Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 08:17:59 AM i got a prop center mount off Yagmur & its perfect with the bearing complete.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: theredx19 on November 08, 2009, 09:22:13 AM Sold a genuine one this year to a member this year last one I had
Title: Re: Ball bearing for prop shaft mount. 131 Post by: Walezy on November 08, 2009, 10:03:42 AM The price for a complete mount is about 15 euro, it includes bearing.Rubber coupling is about 12-15euro - depends where bought.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 10:14:43 AM they are on ebay for ?40 + post
Title: Re: Ball bearing for prop shaft mount. 131 Post by: mirafioriman on November 08, 2009, 10:32:38 AM I think Walzey should buy a few and start listing them on ebay a good way to make a bit of a profit!
Title: Re: Ball bearing for prop shaft mount. 131 Post by: djape1977 on November 08, 2009, 11:20:54 AM i really don't see why you guys have a need to pay more than necesary for parts? that propshaft mount and bearing is widely available in eastern europe, poland included, since it was used on fso 125p and fso polonez, and on lada also. i've used those mounts from fso and from lada, whichever i got my hands on, and they were decent quality, lasting aprox 50.000kms each. prices were in the range of 15e
Title: Re: Ball bearing for prop shaft mount. 131 Post by: eugene on November 08, 2009, 12:58:42 PM The rubber doughnut i understand is the same as fitted in Lada's(djape,correct me here if i am incorrect).Having been to eastern europe often,Walzey&djape are correct in what they state.I see a new parts venture opening here ::) ;).Eugene
Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 01:26:12 PM i have been trying to buy clear indicators from a lad in Rijeka-Croatia & he says he cant post to Ireland?? so thats why we buy the parts here, its very frustrating when you cant get the stuff posted!! backward or what? sorry but thats what i think, no problem getting stuff from Yagmur in Turkey & its further also i got loads of toyota parts in Oz & Nz, can anyone over there in eastern Europe get me the clear side indicators for a 131?
Title: Re: Ball bearing for prop shaft mount. 131 Post by: 106usj on November 08, 2009, 01:45:10 PM I agree parts in uk are way over priced.They take advantage of them being quite rare over here.The european issue can be postage though.
The Europe parts you guys get are so much cheaper. If Walezy and dj did buy and sell on ebay or this site it would be good . Title: Re: Ball bearing for prop shaft mount. 131 Post by: eugene on November 08, 2009, 02:52:37 PM I have often got various parts from Ukraine and never had any problems,but remember,watch out for the coustems,as parts obtained from outside European Union countries are subject to TAX :'( :'(.Eugene
Title: Re: Ball bearing for prop shaft mount. 131 Post by: djape1977 on November 08, 2009, 04:31:54 PM The rubber doughnut is the same on lada, fso polonez, fso 125, fiat 131, 132 and argenta.
i don't see any problems with post except the price. bigger parts can be expensive for sending. Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 07:11:50 PM Eugene anything over ?22 we get screwed for tax, i bought a hard drive enclosure for my back up hard drive (i got given to me new) in hong kong on fleabay total cost incl post ?13 & the customs held it until i proved that it cost less than ?22 so i sent them a copy of the paypal recipt & they released it to me, this item costs ?65 in pc world Dundalk?? rip off Ireland or what?
Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 07:13:32 PM djape this is a pic of the indicators i need can you help me?
Title: Re: Ball bearing for prop shaft mount. 131 Post by: djape1977 on November 08, 2009, 08:00:32 PM i'm already working on getting a set of those for my 131. when i get 'em i'll report here.
btw, i bought some parts from that same guy in rijeka and i got my parts no problem whatsoever. couple of doormirrors for 131 and 132, 132 front grille, some plastic trim etc... those indicators might be available locally since they are the same for zastava cars, orange of course. someone miust be producing those clear ones. i've seen clear rear lamps for 128... Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 08, 2009, 08:09:18 PM well try your best please, in fact if you buy from this guy & post to me i will pay you some beer even though you only have one now & then!! :) :) :) ;) ;) ;D ;D
Title: Re: Ball bearing for prop shaft mount. 131 Post by: Walezy on November 08, 2009, 08:31:50 PM Looks like standard FSO polonez side indicator but used in earlier models. I could ask for it but probably not a clear version.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: Walezy on November 08, 2009, 08:34:02 PM http://www.allegro.pl/item809592730_nowe_lampy_lampa_kierunkowskaz_fiat_125p_polonez.html (http://www.allegro.pl/item809592730_nowe_lampy_lampa_kierunkowskaz_fiat_125p_polonez.html)
Title: Re: Ball bearing for prop shaft mount. 131 Post by: eugene on November 08, 2009, 08:44:25 PM There the same as on the wing of the Lada Niva,but in Amber.I have seen them in white on some Nivas in Ukraine while there.Will match them in the morning with the 131. ::)Eugene
Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 09, 2009, 08:55:17 AM one of the sports i broke had lovely sporty indicators in clear but they were tatty if i find i will post a pic, i just want the clear ones in the pic if possible.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: Yagmur on November 09, 2009, 08:52:28 PM that indicators are 5 Euro,brand new but amber.
Title: Re: Ball bearing for prop shaft mount. 131 Post by: sid131 on November 09, 2009, 09:27:44 PM Hi Yagmur i have the amber ones new would like a pair of clear ones.
|