It's a long time since I've had or even closely looked at a Series 1 but from memory they used open contact wire to pcb molex type connectors (
www.molex.com). If someone can post a picture of the required connectors I might be able to find a source for them. Alternatively, solder the wires straight onto the pcb in the lights and that way you won't get the usual bad connections to the lights
![Wink](http://131mirafiori.com/smf/Smileys/default/wink.gif)
If you need to have a quick means of removing the lights then fit an in-line multiplug connector in the wires close to the lights.