Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
October 17, 2017, 10:25:08 AM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  General discussion (Moderator: Admin)
| | |-+  Replica cd 66
« previous next »
Pages: [1] Go Down Print
Author Topic: Replica cd 66  (Read 329 times)
ZFA16V
Sr. Member
***
Offline Offline

Posts: 62



« on: August 06, 2017, 08:35:21 AM »

Hi
Would anyone know if a 15 x 7 with a 20mm offset fit a 131?(with standard panels)
Don't want to buy this set i'm looking at from the states if they don't fit.
I have 16 x 6.5 with a 20mm offset at the moment.

Thanks


* mR5PhiAZYulnvZz0zlg9Oog.jpg (17.69 KB, 225x169 - viewed 174 times.)
Logged
TOAD
Hero Member
****
Offline Offline

Posts: 935


Green Eye Motorsport - Home Of The Toad


« Reply #1 on: August 06, 2017, 10:45:26 AM »

As this will be wider inside and outside. Don't forget to check the clearance against the springs and dampers, and depending on the tyre sizes,check the clearance against the back of the front wheel arch the bulkhead, and the bottom of the same but at the front edge.     Bulkhead is easily dressed back and dosnt change the pedle  space.
Logged

Video of Big Toad Build up.   www.youtube.co.uk/evotoad
finnie
Hero Member
****
Offline Offline

Posts: 265



« Reply #2 on: August 06, 2017, 07:27:22 PM »

Try
willtheyfit.com 😉
Logged
ZFA16V
Sr. Member
***
Offline Offline

Posts: 62



« Reply #3 on: August 08, 2017, 11:22:21 AM »

That's correct toad....wheel will be wider,in/out....but only by 6mmish.
Will check my clearances if i got room for this 6mm.
Finnie....that's for that info,as it helped.
they do suggest a 205/50/15,but i might fit at 195/50/15 maybe.
« Last Edit: August 08, 2017, 11:35:13 AM by ZFA16V » Logged
MrMaxi
Jr. Member
*
Offline Offline

Posts: 29


« Reply #4 on: September 22, 2017, 11:09:44 AM »

Hey ZFA, did you end up getting these ?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  



Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.



Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com