Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
June 18, 2018, 10:50:21 AM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  The Garage (Moderator: Admin)
| | |-+  Alloy head welding wanted
« previous next »
Pages: [1] Go Down Print
Author Topic: Alloy head welding wanted  (Read 324 times)
parrish
Hero Member
****
Offline Offline

Posts: 812


« on: February 25, 2018, 04:24:57 PM »

Iím looking for some one who can weld my 124AC Cylinderhead front waterway.
As some of you may know the 124AC head will not fit directly on a 132 block due to the front water way being too large on the cylinder head which impedes on the gasket seal of No:1 cylinder.
I have a rebuilt 124AC head.
Basic procedure would be to heat to 300 plus degrees, Tig weld (fill) wrap and let cool slowly followed by head skimming which I can get done elsewhere.
Logged

Steve Parrish owner of:  1977 131 4 door, 1934 Citroen Rosalie, 2017 Vauxhall Corsa.
vode131
Full Member
**
Offline Offline

Posts: 31


« Reply #1 on: February 28, 2018, 07:26:46 PM »

Make sure that there are no more holes that go under the firering. I have 125B000 head that is going to 84mm. block and we had to weld 4 holes and redrilled in right places. Two small holes at back of the head and one small hole in front and the big front waterway.

« Last Edit: February 28, 2018, 07:34:33 PM by vode131 » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  



Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.



Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com