|
Title: Dutton Phaeton 131 Post by: rocky_679 on July 12, 2015, 11:30:24 AM have bought a Dutton Phaeton kit car it has fitted a 131 super mirafiori 2 ltr engine mated to a fiat 124 gearbox, the donut on the propshaft which the 124 has is catching the chassis member so does any one know where i can find a bell housing for a 131 and a single piece propshaft ??? the 132 engine im runing twin 40s vertical
Title: Re: Dutton Phaeton 131 Post by: jasonh131 on July 12, 2015, 06:01:17 PM Nice engine any way, cam vernier mean special cams ?
i take this was not a sorted kit car ! most off the props are the same have a donut , how much room is there under there , take a pic . could the engine be moved over or the box section cut out and moved to side ,seen that done before on it fitint of retro firt engines . some one else may know about a prop having no dounts just UJs Title: Re: Dutton Phaeton 131 Post by: mirafioriman on July 12, 2015, 06:10:19 PM Does it have a centre bearing? If so check the bracket is on the right way round. From memory if irs the wrong way round it will pull the shaft slightly off centre.
Title: Re: Dutton Phaeton 131 Post by: rocky_679 on July 12, 2015, 08:56:08 PM yes it has a donut and a 2 piece prop
Title: Re: Dutton Phaeton 131 Post by: rocky_679 on July 12, 2015, 09:22:14 PM meant to say definitely sorted ;D just the prop has started to foul as the modification as the mounting has got old an worn
Title: Re: Dutton Phaeton 131 Post by: jasonh131 on July 13, 2015, 05:54:28 PM meant to say definitely sorted ;D just the prop has started to foul as the modification as the mounting has got old an worn If that is all it is !! just renew all the worn mounts .. ??? ::) ::) ::) Title: Re: Dutton Phaeton 131 Post by: rocky_679 on July 15, 2015, 09:16:23 AM the mounts where custom made :'(
|