Click to go to back to www.131mirafiori.com Welcome, Guest. Please login or register.
September 22, 2025, 05:40:05 PM
Home Help Login Register

+  131mirafiori forum
|-+  131mirafiori home
| |-+  For Sale and Wanted (Moderator: Admin)
| | |-+  FIAt 131 Steering Rack Rubber Bushes and Mounting Straps
« previous next »
Pages: [1] Go Down Print
Author Topic: FIAt 131 Steering Rack Rubber Bushes and Mounting Straps  (Read 6448 times)
Sandro
Jr. Member
*
Offline Offline

Posts: 20


« on: July 05, 2013, 08:03:22 AM »

Hi All,

I have a 131 steering rack and need the mounting bushes that go in between the rack and the crossmemeber, also the steel semicircular straps the bolts the rack in place?

does anyone have any spare?

regards

sandro
« Last Edit: July 08, 2013, 12:22:08 PM by Sandro » Logged
Yagmur
Hero Member
****
Offline Offline

Posts: 710


« Reply #1 on: July 05, 2013, 08:07:32 AM »

I have....
hope you haven't seen my topic yet...
http://www.131mirafiori.com/smf/index.php?topic=81.0
Logged
Sandro
Jr. Member
*
Offline Offline

Posts: 20


« Reply #2 on: July 08, 2013, 12:39:16 PM »

HI Yagmur

thnak you for your reply, I found these part number on this post. Are these the correct ones for the manual steering rack?

 mounting brackets  4323098 and 4307112 and rubbers 4323099 and 4323097..

I think these part numbers were posted by Miro


regards

sandro
Logged
Yagmur
Hero Member
****
Offline Offline

Posts: 710


« Reply #3 on: July 08, 2013, 02:57:24 PM »

Hi sandro,
E mail sent..
Logged
Sandro
Jr. Member
*
Offline Offline

Posts: 20


« Reply #4 on: November 11, 2013, 12:13:10 PM »

Guys,

im starting to get desparate for these, can anyone help? even polyurethane bushes.

I need the steel bracket and the bushes

anyone?

sandro
Logged
131rally
Hero Member
****
Offline Offline

Posts: 362


« Reply #5 on: November 13, 2013, 08:01:02 AM »

I have some used rubbers and new g.4 spec reinforced clamps. http://131abarth.com/?page_id=76



I have also one fully refurbished fast steering for LHD.
https://www.facebook.com/media/set/?set=a.427450017377719.1073741839.329158520540203&type=1

Contact, marko1vaisanen(atatatat)gmail.com
Logged
Sandro
Jr. Member
*
Offline Offline

Posts: 20


« Reply #6 on: November 16, 2013, 07:49:21 PM »

HI Marko

thank you for the offer but I have located some now...mine is for a RHD car, im doing a rack and pinion conversion on a fiat 124 spider

thanks again

sandro
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  



Disclaimer: This forum is available free and is part of a non-profit website run by volunteers for the benefit of owners and enthusiasts of the various models of the Fiat 131 and derivatives. Information is provided in good faith and no liability can be accepted by any individual for any situation arising from the use of this information.

Opinions expressed in this forum are those of the contributors and not of the website's owners, administrators or moderators who cannot accept any responsibility for the results of following any advice given by contributors.

The administrators and moderators of this forum reserve the right to edit or delete anything they consider to be of a defamatory, discriminatory, derogatory, abusive or otherwise unacceptable nature.



Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Click to visit www.thotos.com